MOTORUP Xtreme Engine Treatment
$49.99
Fully Synthetic
- Extreme Pressure Protection
- Improves Power & Performance
- Increased Fuel Economy
Out of stock
Protects and improves performance
Protects your engine from most destructive forces: friction, extreme pressure, heat, cold, corrosion, dirt, carbon deposits & dry starts.
MOTORUP Xtreme Engine Treatment performs like no other engine treatment, oil additive or motor oil. It’s unique “micro bearing” technology has an extraordinary ability to withstand loads and reduce friction in your engine. As per the American Petroleum Institute (API) extreme pressure is found in several parts of the engine:valve train including cams, valve lifters, push rods, valve stem tips, and rocker arm parts. MOTORUP Xtreme Engine Treatmentis most effective where engine wear, loss of power, bad performance leading to expensive breakdowns occur. Add the most advanced protection to your engine now!
| MOTORUP Xtreme | Premium Synth. Oil | |
| Friction & Wear Protection (E.P.P.) (*) | 800kg | 200kg |
| Power & Performance | * * * * * | Standard |
| Fuel economy | * * * * | Standard |
| Emissions (Co2) | * * * * | Standard |
| Heat Protection | * * * * * | * * * |
| Low Temperature Protection | * * * * | * * * |
| Corrosion Protection | * * * | * * |
| Dirt & Carbon deposits | * * * | * * |
| Engine Wearing Dry Starts | * * * * * | * |
(*) Testing by independent lab. Petro-Lubricant Test Labs, Inc. in New Jersey, USA. (ASTM. American Society of Testing Materials standardized test D-2783). (1) The results in this chart may not be accepted by local consumer authorities in some countries.
- Feel instant boosts in horsepower and performance.
- Dynamometer tests conducted in the USA and Japan show substantial improvement in horsepower, acceleration and fuel economy.
- Less friction results in reduced engine wear, lower operating temperatures, easier cold weather starting and reduced exhaust emissions.
Millions of MotorUP users satisfied in 50 countries around the world!
| NO NEED TO WAIT FOR AN OIL CHANGE – JUST POUR IT IN AND GO! | |||
| Compatibility | Frequency of Use | Dosage | |
| Gasoline-Petrol | Yes | Every 2nd to 4th oil change | 5% to 10% of oil volume |
| Diesel – LPG – CNG | Yes | ||
| Synthetic – Mineral Oil | Yes | ||
| New/Old cars | Yes | ||
| Trucks, Buses – SUV’s | Yes | ||
| Turbo Charged Engines | Yes | Every 2nd oil change | |
| Boats | Yes | Every oil change | 10% of oil volume |
| 4 stroke motorcycles | Yes | Every 2nd to 4th oil change | Max 3% in wet clutches |
| 1x 8oz, 240ml bottle will treat all vehicles with an oil volume of up to 1.5gals or 5ltrs | |||
- MotorUp Xtreme complies with ILSAC GF5 and CG5 regulations for catalytic converters.
- Contains no PTFE, MOS2, Cl paraffin, Zn, P or S.
Directions
Sizes
- 240 ml
- 1 liter
- 4 liter
- 5 gallons Pail
- 55 gallon Drum.
Video
FAQ's
MOTORUP Xtreme Engine Treatment is a synthetic composite of super-concentrated, multi-functional additives that dramatically increase the effectiveness of motor oils and lubricants. MOTORUP Xtreme Engine Treatment protects the engine from most destructive forces: friction, extreme pressure, heat, cold, corrosion, dirt, carbon deposits & dry start engine wear. MOTORUP Xtreme Engine Treatment improves the performance of even the finest synthetic and petroleum motor oils.
MOTORUP Xtreme Engine Treatment´s unique “micro bearings” have an extraordinary ability to withstand loads and reduce friction in the engine. MOTORUP Xtreme Engine Treatment treats the metal plus fortifies the motor oil to improve cleanliness, contamination control, operating temperature improvement, and corrosion protection.
You can start your first application at any time, it is not necessary to change out your engine oil MOTORUP Xtreme Engine Treatment readily mixes with all petroleum and synthetic-based fluids. You can use MOTORUP Xtreme Engine Treatment in new cars as well as older cars.
Do I have to change my oil before adding MOTORUP Xtreme Engine Treatment?
Use 5% to 10% of oil volume. 1 bottle of MOTORUP Xtreme Engine Treatment 240ml (8 oz) per 5 litres of oil.
You should always wait until the engine is cool before performing any work on it.
Every 2nd to 4th oil change, depending how often you change your oil. Best results are achieved when used most often.
Yes.Lubrication in all combustion engines work under the same principle. MOTORUP Xtreme Engine Treatment is recommended for all combustion engines.
Yes. MOTORUP Xtreme Engine Treatment is compatible with mineral and synthetic oil.
Yes. MOTORUP Xtreme Engine Treatment will protect it from new. Turbo charged engine oil has to withstand more stressing conditions and higher temperatures. MOTORUP Xtreme Engine Treatment extreme pressure agents will benefit both the turbo and the engine.
Absolutely not! All MOTORUP products have been thoroughly tested by independent laboratories. MOTORUP products deliver the performance as documented. MOTORUP products have been proven safe and very effective in numerous automotive and industrial applications. More than 14 million bottles of MOTORUP have been sold to satisfied customers.
Absolutely not! MOTORUP Xtreme Engine Treatment is intended for the engine. Please refer to MOTORUP Transmission Treatment for transmission protection. If used in automatic transmissions, any brake system, limited slip or posi-traction differential, slippage could occur due to over-treatment.
Yes. If the bike has a wet clutch that uses the same oil for the engine, add maximum 3% of MOTORUP Xtreme Engine Treatment to oil.
Yes you can. Add 5 to 10% of oil volume.
Yes. Lubrication in all combustion engines work under the same principle. MOTORUP Xtreme Engine Treatment is recommended for all combustion engines.
The top portion of the main crank bearings, all valve train components and any area that does not have forced oil lubrication. These areas are well protected by MOTORUP Xtreme Engine Treatment extreme pressure and anti-wear additives. Additional protection is provided by MOTORUP Xtreme Engine Treatment unique ability to remove hard varnish deposits and the suspension of sludge, so that both of these wear products can be filtered out. All of these life-extending benefits are incorporated in MOTORUP Xtreme Engine Treatment.
Part of our balanced formulation is a specially designed detergent that works in conjunction with the other performance chemistry to remove hard varnish deposits and keeps soft sludge from accumulating on engine parts. All of these harmful by-products of combustion are then accumulated into a more easily filtered size or remain in suspension to be removed at oil change out. Couple this with the reduction of wear by our extreme pressure additive system and you have a real winning combination!.
MOTORUP Xtreme Engine Treatment does an excellent job in keeping water and contamination away from the metal surfaces. The special surface affinity that our product demonstrates helps to prevent the water/glycol from attacking the sensitivity main bearings and other critical engine parts.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.